Overview
Edenta Diamond Finishing Strips Non-Serrated
Diamond finishing strips are metal strips diamond-coated on one side. They are available in three different grits and used chairside for breaking the interproximal contacts.
- Made in Switzerland
- 10 pieces per box
- Autoclavable
- Single side coated
Available in:
- 147mm length
- 2.5mm or 3.75mm width
- Medium, fine or super fine grit
Range of indications:
- Trimming excess material on the proximal regions of fillings
- Contouring the proximal regions of all types of filling
- For use on composites, acrylics, glass-ionomer cements, amalgams, etc
- Removing excess cement after placing inlays, onlays, and laminate veneers
Application:
- As the centre section of these strips is not diamond-coated, they can be pulled backward and forward through embrasures. The diamond-coated surface must point toward the filling being trimmed. The diamond-coated section is pulled over the filling to trim off any excess material and contour the filling anatomically. The strips are used in descending order, from medium grit down to superfine.
